-
Fast Delivery Dispatch in 24 hrs
-
Satisfaction Guaranteed.
-
Secure Payments
-
Need help? Call Us 01744 520 110 or email sales@rubberstrip-uk.co.uk
Our Clients
Description
Industrial & Commercial Rubber
Solid SBR Rubber Strip — 2mm Thick
A commercial-grade solid rubber strip manufactured from a natural rubber and styrene-butadiene rubber (NR/SBR) blend, supplied in a 5-metre roll. At 2mm thick, this strip delivers a reliable, flexible seal in a slim profile — making it the go-to choice for weather stripping, gasket fabrication, vibration damping, bump protection, and general-purpose sealing across engineering, manufacturing, construction, and DIY applications. Available in eleven widths from 10mm to 100mm to suit virtually any requirement.
Select Your Width
Available Widths
All widths supplied as a 2mm thick × 5m long roll. Select your preferred width from the menu above.
Why Choose This Strip
Key Features
- Commercial-grade NR/SBR blend — robust, flexible, and built for sustained performance in demanding environments
- Uniform 2mm thickness — consistent cross-section throughout the full 5-metre roll
- 65 Shore A hardness (±5°) — firm enough to resist deformation, supple enough to conform to irregular surfaces
- Wide operating temperature — maintains integrity from −30°C to +70°C
- Waterproof and moisture-resistant — reliable in wet, damp, or outdoor-sheltered conditions
- Good abrasion and impact resistance — withstands repeated contact and mechanical wear
- Easily fabricated — cut cleanly with scissors or a craft knife; bonds to most hard surfaces with a general-purpose contact adhesive
- Eleven widths available — 10mm through to 100mm, all from UK stock
Where It’s Used
Typical Applications
Full Technical Data
Technical Specification
| Property | Standard | Unit | Value |
|---|---|---|---|
| Base Polymer | — | — | NR / SBR (Natural Rubber / Styrene-Butadiene Rubber) |
| Colour | — | — | Black |
| Grade | — | — | Commercial |
| Indentation Hardness | ASTM D2240 | Shore A | 65 (−4 / +5) |
| Tensile Strength | ASTM D412 | MPa | 3.0 (minimum) |
| Elongation at Break | ASTM D412 | % | 250 (minimum) |
| Density / Specific Gravity | — | g/cm³ | 1.50 |
| Working Temperature | — | °C | −30 to +70 |
| Compression Set | Condition / Temp. | Unit | Value |
|---|---|---|---|
| ASTM D395 Method B | 70°C — 22 hours | % Max | 30 |
| Performance Characteristic | Rating |
|---|---|
| General Purpose Use | Excellent |
| Abrasion Resistance | Moderate |
| Waterproof / Moisture Resistance | Good |
| Food Contact | Not recommended |
| Ozone Resistance | Not recommended |
| Flame Retardancy | Not recommended |
| Electrical Resistance | Not recommended |
| UV / Outdoor Exposure | Not recommended for prolonged exposure |
| Petrol / Solvent Resistance | Not recommended |
Dimensions & Tolerances
Dimensions & Manufacturing Tolerances
| Dimension | Value |
|---|---|
| Thickness | 2mm |
| Roll Length | 5 metres |
| Available Widths | 10mm, 12mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 75mm, 100mm |
| Width Range | Width Tolerance |
|---|---|
| 10mm to 25mm | ± 1.0mm |
| 25.1mm to 100mm | ± 1.5mm |
| 100.1mm to 250mm | ± 2.0mm |
| Thickness | Thickness Tolerance |
|---|---|
| 2mm | ± 0.28mm |
Customer Questions
Frequently Asked Questions
What widths are available, and how long is each roll?
Eleven widths are available: 10mm, 12mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 75mm, and 100mm. Every width is supplied as a 2mm thick × 5-metre roll.
Can this rubber strip be used outdoors?
It performs well in sheltered outdoor settings, but prolonged exposure to direct UV light, petrol, or solvents is not recommended as these can degrade the material over time.
How do I cut and fix the strip in place?
The strip cuts cleanly with scissors or a craft knife. It can be bonded to most hard surfaces using a general-purpose contact adhesive.
Is this strip suitable for food contact or electrical applications?
No. This is a commercial-grade general-purpose strip and is not recommended for food contact, electrical insulation, or flame-retardant applications.
What are the size tolerances I should expect?
Thickness tolerance is ±0.28mm. Width tolerance ranges from ±1.0mm (for widths up to 25mm) to ±1.5mm (25.1mm–100mm). These are standard manufacturing tolerances for this type of rubber strip.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.